Advertisement
Premium GI Luting
Glass Ionomer Luting Cement Type I
This is a glass ionomer cement glass polyalkinoate cement for luting. GI Luting (Glass Ionomer Luting Cement) has a low solubility in the mouth and a low acidity.
Fields of application:
For attaching crowns, bridges, inlays, onlays, pins, posts and orthodontic bands.
Method of use:
Clean enamel, dentine and metal surfaces thoroughly and dry completely. Make sure not to leave any traces of other materials which could impair the properties of GI Luting (Glass Ionomer Luting Cement). Temporary work should be attached with an eugenol- free Cement. Before attachment clean the core, rinse (e. g. with H2O2) and dry.
When using GI Luting (Glass Ionomer Luting Cement) for the first time, remove cap from bottle and fit the pipette attachment supplied.
Shake the powder well before use!
The working temperature should be 150C-230C.
Use one drop of liquid for one level measuring scoop of powder (powder/liquid ratio=3.0:1 g/g).
Put powder and liquid on a suitable glass plate or a suitable mixing pad.
When dispensing the liquid, hold the dropper bottle vertically. It is recommended to divide the powder in 3 portions and to mix it portion by portion into the liquid, using a solid plastic spatula or another abrasion- resistant spatula.
Mixing time Working time Setting time
30 s 3 min 5-7 min
Application:
GI Luting (Glass Ionomer Luting Cement) has a working time of approx. 3 min and sets after 5-7 min (3-5 min in the mouth). Higher temperatures shorten the working time, low temperatures prolong it.
The correct consistency is achieved when GI Luting (Glass Ionomer Luting Cement) is applicable to the core with a hard brush. It is essential to avoid contact with water and saliva during application and setting.
Glass Ionomer Luting Cement Type I
This is a glass ionomer cement glass polyalkinoate cement for luting. GI Luting (Glass Ionomer Luting Cement) has a low solubility in the mouth and a low acidity.
Fields of application:
For attaching crowns, bridges, inlays, onlays, pins, posts and orthodontic bands.
Method of use:
Clean enamel, dentine and metal surfaces thoroughly and dry completely. Make sure not to leave any traces of other materials which could impair the properties of GI Luting (Glass Ionomer Luting Cement). Temporary work should be attached with an eugenol- free Cement. Before attachment clean the core, rinse (e. g. with H2O2) and dry.
When using GI Luting (Glass Ionomer Luting Cement) for the first time, remove cap from bottle and fit the pipette attachment supplied.
Shake the powder well before use!
The working temperature should be 150C-230C.
Use one drop of liquid for one level measuring scoop of powder (powder/liquid ratio=3.0:1 g/g).
Put powder and liquid on a suitable glass plate or a suitable mixing pad.
When dispensing the liquid, hold the dropper bottle vertically. It is recommended to divide the powder in 3 portions and to mix it portion by portion into the liquid, using a solid plastic spatula or another abrasion- resistant spatula.
Mixing time Working time Setting time
30 s 3 min 5-7 min
Application:
GI Luting (Glass Ionomer Luting Cement) has a working time of approx. 3 min and sets after 5-7 min (3-5 min in the mouth). Higher temperatures shorten the working time, low temperatures prolong it.
The correct consistency is achieved when GI Luting (Glass Ionomer Luting Cement) is applicable to the core with a hard brush. It is essential to avoid contact with water and saliva during application and setting.
Phase-8B, Industrial Area F-343
160071 Chandigarh, Mohali Punjab
India
160071 Chandigarh, Mohali Punjab
India
more information
Hall 3.2 | C048 D049