E-CONNECT

This is our most classic endo motor called e-connect. As you can see it’s a cordless equipment, so it’s convenient for dentists to do treatment. The contra angle is small and can be rotated 360 degrees without being taken off. Make it easy to watch the display and offer better visibility during treatment. Also it be can connected with our Apex locator-E-Pex which allow you to shape the root canal during measure apical length.. Specification：Speed: 120-1000rpm Torque: 0.5 N.cm – 4 N.cm Motion: forward, reverse and reciprocating Weight: 160g Battery Capacity: 1500mAh

Now let me show you how to use this device. First of all, connect the contra angle and handpiece properly. Make sure the motor is stopped when installing the contra angle. Press this power button to turn on the device. E-CONNECT has 10 memory mode (M0 to M9). M0 is reciprocating mode, there are 5 reciprocating angles, press S key to switch. From M1-M9 users can set speed, torque and motion by themselves. Press S key to change to speed (120-1000rpm) and torque (0.5 N.cm – 4 N.cm) as well as the direction(FWD/REV). Long press the S key to enter the connect function, connect functions could be activated when connect with E-PEX apex locator. During power off state, holding down press S key then press power button immediately to entry advanced setting, Press S key to change target setting(Beeper Volume/Auto power off time/Habit hand - which some dentists prefer to use the device with left hand/Calibration) , press left/right key to adjust, then press the power button to confirm.

Connect with E-PEX Connect E-CONNECT with E-PEX by connect cable. The screen of the E-CONNECT will display “CONNECTED !”.